The Scrub Abrasion and Washability Tester is used to test the resistence of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion, by simulating everyday wear from cleaning actions or general use.
The test is either used as a “pass or fail” test by testing to a specified number of strokes or defining the minimum number of strokes at which a coating fails by checking at regular intervals. The Scrub Abrasion and Washability Tester is suitable for a wide range of scrub, abrasion and washability tests that are in use.
Standards: ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, ISO 11998
| averse Speed | 1 – 60 cycles per minute |
|---|---|
| Traverse Speed Accuracy | +/- 1% of set speed |
| Stroke length | 20 – 300 mm / 0.39 – 11.81 in |
| Stroke Length Accuracy | +/- 0.01 mm |
| Pump Flow Rate | 0.0 – 3.0 ml per minute / 0.0 – 0.79 GPH |
| Max. Panel Length | 350 mm / 13.78 in |
| Max. Panel Width | 70 mm / 2.76 in |
| Max. panel thickness | 35 mm / 1.38 in |
| Dimensions | 490x640x235 mm / 19.3×25.2×9.24 in |
| Height with pumps | 530 mm / 20.87 in |
| Mass | 33 kg |
| Power | 100 – 240VAC / 50 – 60Hz |
| Power Consumption | Max. 50 Watt |
| Display | 480 x 272 pixel TFT panel |
| Controls | 5-key Navigation Switch, Mouse and Keyboard Optional |
