The TQC Sheen Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessories) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14
Mandatory test in Qualicoat, QIB and GSB accredited laboratories.
Standards for impact testing
Below mentioned standards are a list of the possible standards. If the required standard is not listed below please contact TQC to check if adoption of this standard is possible*:
|
SP1880 |
SP1890 |
SP1891 |
SP1895 |
SP1896 |
|
| Type of Impact |
Indirect |
Direct |
Direct |
Direct |
Direct |
| ISO 6272-1:2002 |
|
• |
|
|
|
| ISO 6272-2:2002 |
• |
|
|
|
|
| ISO 6272:1993 |
|
|
• |
|
|
| ASTM D 2794:2004 |
• |
|
|
|
|
| ASTM G14-04 |
|
|
|
• |
|
| JIS K 5600-5-3:1989 |
• |
• |
|
|
|
| EN 12206-1:2004 |
• |
|
• |
• |
|
| EN 13523-5:2001 |
• |
• |
|
|
|
| AAMA 2605-05 |
• |
|
• |
|
|
| Qualicoat 2006 |
• |
|
• |
|
|
| Qualisteelcoat 2008 |
• |
|
• |
|
|
| Canadian Standards Association (CSA) |
|
|
|
|
• |
* Conformation to a required standard depends on the impact tester type. The combination of items can change to comply with another standard.
